Download file

Download now


File size 416 KB
Requires iNODE version 1.8.7
Date Published 29/08/2016 09:53


This patch includes bugfixes for iNODE™ v1.8.7 so can be installed on any installation with a valid contract.

Following is the list of issues included :
  • Issue #2000 E-Mail content filtering general settings can not be unchecked
    When unchecking a setting in "Configuration :: E-Mail Content filtering :: General Settings", the interface reports that all settings have been saved, but the setting actually remained checked.
  • Issue #1999 m2fuid milter filter not running
    In case mail 2 fax service is enabled for the mail server and email content filtering is also enabled, the error message "Milter (m2fuid): error connecting to filter: Connection refused" may appear in the log files.
  • Issue #1996 Issues with email content filtering
    An issue may cause changes to the email content filtering to not be applied to the system and in some cases may cause the email content filtering to fail completely, resulting in emails not being filtered (antivirus and antispam). The issue has now been fixed.
  • Issue #1995 Missing multiple printer drivers
    All gutenprint drivers are missing after updating to 1.8.7. Gutenprint drivers are restored and made available again and printers using them should work without problems.
  • Issue #1993 IPSec connections only support DH group 5 when PFS setting enabled
    IPSec connection that have the PFS setting enabled, would only support DH Group 5 (1536-bit). Connections with remote systems configured with a different DH group would fail. With this patch, DH Group 2 (1024-bit) is also supported.
  • Issue #1987 Issues with multiple IPSec roadwarrior connections with different settings
    When multiple roadwarrior connections are set up with different settings, may cause some connections to fail after negotiation IKE phase 1. With this patch AES128 and 3DES precedence is ignored for roadwarrior connections, but any other IKE phase 1 settings (PFS and rekeying settings mainly) should be identical for roadwarrior connections.
  • Issue #1980 Leading spaces missing from realtime logs
    In realtime logs, any leading spaces would be truncated from log lines.
  • Issue #1979 T38 calls log not available
    T38 calls logging was not functioning. The T38 calls log is now working properly again.

This patch should only be installed on release 1.8.7 via update page of web management interface ( "Maintenance::System::Update").
Note: Application of this patch will reboot the system.

MD5 Checksum: 2daf3e4323eae7544febe85ed294b618

« previousnext »
All downloads